Uwatec D420 - Service Tools; Cutting and Driving Tools; Specialized Wrenches; Handling and Gripping Tools

3
Tools
• Flat blade screwdrivers, 2.5mm and 5mm
• Non-serrated thin bladed, sharp knife
• Pin punch (MK2 seat tool) PN 43.300.210
or 1.5mm hex key
• Flow Vane Face Spanner PN 43.420.012 or small pin face spanner
• Scubapro Multitool PN 43.040.000 or small pin face spanner
• 3/32" Allen key PN 43.002.101
• 2mm, 5mm and 6mm hex keys
• O-ring pick PN 43.300.107
• 3/16” wooden dowel or blunt brass pick
• Small needle nose pliers, forceps or tweezers
• Front Ring Retaining Tool PN 43.404.003
or rubberized “jar lid remover”
• Torque wrench PN 43.300.998
• 6mm Hex drive extension PN 43.040.009