EasyManuals Logo

Uwatec Digital 330m User Manual

Uwatec Digital 330m
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
29
UWATEC Digital 330m - English
D
E
4.2 Logbook
Upon touching contacts A and C with moistened fingers during surface
mode, the Digital 330m enters the logbook mode. The Digital 330m stores
the relevant data for the most recent 19 dives. A dive is only entered into the
logbook if it was deeper than 1.2 m / 4 ft and longer than 2 minutes.
In logbook mode, the display shows “log no.”, the dive number, dive time,
maximum depth, and alternating temperature and average depth as indi-
cated in the figure. The logbook starts from the most recent dive (no 1) and
for each subsequent contact of A and C scrolls through the next dive in
sequence. Keeping your fingers on contacts A and C will call up all dives in
sequence. After the 19th dive, dive number 1 is shown again.
To exit the logbook mode, touch contacts A and B. The logbook mode is
exited also after 3 minutes without operation.
log no.
h
ºC
Temp
S
L
O
W
C B
A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uwatec Digital 330m and is the answer not in the manual?

Uwatec Digital 330m Specifications

General IconGeneral
BrandUwatec
ModelDigital 330m
CategoryDiving Instrument
LanguageEnglish

Related product manuals