Uwatec X650 Repair Guide

SCUBAPRO X650 SECOND STAGE
©2003 SCUBAPRO
Important note: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
2
TOOLS NEEDED FOR REPAIR
OF X650
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
Quantity Part Number Description
1 43.650.220 X-650 Lever Tool
1 set 10.102.100
(Peter Built)
Brass o’ring picks
1 tube 41.047.000 Christo-Lube
Christo-Lube
OXYGEN COMPATIBLE LUBRICANT
P/N 41-047-000
1 47.010.000 Counter Mat
1 41.496.101 Lubricant syringe
Monoject
1 43.040.000
(Scubapro)
Universal Tool
1 Jeweler’s screwdriver (3mm)
1 Philip’s Screwdriver
1 20.500.200
(Peter Built)
Pneumatic Adjusting tool
1 18.300.500
(Peter Built)
Blow Gun/Air Nozzle
ICON LEGEND
Inspect carefully, replace if needed
Monoject
Lubricate properly
Replace annually
Dynamic o’ring, replace annually and lubricate properly
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
No tools needed for this step

Uwatec X650 Specifications

General

Brand	Uwatec
Model	X650
Category	Diving Instrument
Language	English