Instructions
1. Pod filling
a. Pull out the filler plug on the bottom of the pod.
b. Insert the e-liquid bottle nozzle into the filling port to fill it.
c. Put the filler plug back.
d. Install the pod into the device.
Attention:
a. Insert the nozzle of the e-liquid bottle into the filling port,
and then fill the pod with e-liquid.
b. Put the filler plug on as soon as the filling is done. Push
it back securely to prevent e-liquid leakage.
c. Let the pod sit for 10 minutes after the first filling to avoid
coil burning.
d. Please make a timely refilling when the e-liquid is under
MIN level.
2. Airflow adjustment
Slide the airflow adjustment valve on the side of the pod up
and down to adjust airflow.
- 3 -
To Next Page
Loading...
