V-Tec 2-WIRE User Manual

ENGLISH
2-WIRE INTERCOM SYSTEM
USER MANUAL
DT-ENG-DT16D3AL-V1
TALK
MENU
MONITOR

V-Tec 2-WIRE Specifications

General

Brand	V-Tec
Model	2-WIRE
Category	Intercom System
Language	English

Summary

2-WIRE INTERCOM SYSTEM

Precautions

Parts and Functions

Monitor Mounting

Basic Door Release Operation

Intercom Function

Intercom Call

User in one apartment can call other apartments in the system. The namelist is created automatically.

Basic Setup Instructions

How to Enter Main Menu Page

Press MENU Button in standby mode to show the date/time page, then press MENU again for main menu.

Ring Tone Settings

Select 'setup' on main menu to enter setup page. Use directional buttons to select ring tone.

Date and Time Setting

Select 'Advanced set...' on setup page, enter password '2008', then select 'Date/Time Set...' to input date and time.

Slave Address and Guard Unit

Configure Slave Address for user code setting and set Guard Unit Set to 1 for Guard Unit Monitor.

Restore to Default

Select 'Information...' on setup page, then select 'Restore to default' to reset all settings except time.

Unlock Parameter Setting

Access 'Advanced Set...' menu, enter password '2008', and configure unlock time and mode.

Screen and Volume Adjustment

Scene mode selection

Select from Normal, User, Soft, and Bright screen modes for image display.

Brightness and Colour

Adjust the value to get the best image quality for brightness and color.

Ring Volume and Talk Volume

Adjust the ring tone volume and the talking volume for the monitor.

Specifications