V-Tec 2Easy DMR18s User Manual

2-wire Intercom System
2 EASY
1 2 3
654
7 8 9
#0
*
RF CARD
CONTENTS
INTRODUCTION...........................................................................2
Installation Guide........................................................................2
CONFIGURATIONS......................................................................4
Debug State...............................................................................4
Work Mode.................................................................................8
Software Update........................................................................10
Tone Update..............................................................................10
UI Update...................................................................................11
Namelist Update.........................................................................12
by SD Card..............................................................................12
by DT-Cong............................................................................13
DMR18S TECHNICAL MANUAL

V-Tec 2Easy DMR18s Specifications

General

Brand	V-Tec
Model	2Easy DMR18s
Category	Intercom System
Language	English

Summary

Introductions

Installation Guide

Covers device description, parts, functions, and terminal layout.

Mounting Procedures

Details surface and flush mounting methods for the device.

System Specifications

Lists key technical specifications of the DMR18S device.

Configurations

Debug State Overview

Introduces Debug State as the starting point and explains basic menu navigation.

Installer Setup Guide

Guide to entering and navigating the Installer Setup menu within Debug State.

Debug State Configurations

Details settings like Language, Tone Select, Tone Volume, and Unlock Code.

Debug State Card Management

Details card management operations and overview within Debug State.

Debug State Device Functions

Covers Online Monitors, Online Devices, and Voltage Measure functions.

Work Mode Settings

Explains the four available work modes: Standard, DT-DJ, Router, and Gateway.

System Update Procedures

Guides on performing software, voice, and UI updates using SD card.

Namelist Update via SD Card

Details updating the namelist using the NameList.txt file on an SD card.

Namelist Update via DT-Config

Details updating the namelist using the DMR18S-Config software on a PC.