V-Tec 2Easy DMR18s - Debug State Device Functions

2 EASY
4.Format:
Select item 5 to enter
Format
page.Input 8 digits pass-
word to start format.
3.Card Information:
Select item 4 to enter
Card Information
page,the card count will be showed.
To search the Gateway and Online Monitors,input the monitor code
number to search.
To search the online door stations(Max.4 door station can be
searched) and the other accessories.
To check the voltage of the monitor,note that the monitor must be
online.
2.Delete Card:
ONLINE MONITORS
ONLINE DEVICES
VOLTAGE MEASURE
During working at debug
state,press "1#" to enter
tools page.
During working at debug
state,press "1#" to enter
tools page.
During working at debug
state,press "1#" to enter
tools page.
Press NO.“4” to enter
Online Monitors item.
Press NO.“5” to enter
Online Devices item.
Press NO.“6” to enter
Card Manage item.
Input the search
range,then press “#”
to start search.
All devices online or
ofine will be showed.
Input the code,then press
“#” to search.
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
4. Online Monitors
(Search Range)
Gateway:[ ]
IM:[ ] ~ [ ]
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
5. Online Devices
[CDS1]: Online
[CDS2]: Online
[CDS3]: Fail
[CDS4]: Fail
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
[ - - ]
6. Voltage Measure
* Cancel # Save
Show The Card
2. Delete By Card
* Cancel # Save
2. Delete By Card
i
Updated
Card numbs:15977131
U
s
e
r
C
a
r
d
• Select item 2 to Delete By Card.
• Select item 3 to Delete By M.code.
* Cancel # Save
Please Input Room Code
3. Delete By M.code
[ - - - ]
* Cancel # Save
Please Input Room Code
3. Delete By M.code
[ 0 0 1 ]
i
Updated
* Cancel # Save
Card Count: 320
4. Cards Information
* Cancel # Save
[ - - - - - - - - ]
5. Format
Please Input Password
* Cancel # Save
[ 66666666 ]
5. Format
Please Input Password
i
Updated
CONFIGURATIONS
Debug State
DMR18S Technical Menu -7-