V-Tec DMR18S User Manual

DMR18S
User Manual
Door Station
Please read this manual carefully before using the product you purchase, and keep it well for future
use.We reserve the right to modify the specication in this manual at any time without notice.
1 2 3
654
7 8 9
#0
*
RF CARD

V-Tec DMR18S Specifications

General

Brand	V-Tec
Model	DMR18S
Category	Intercom System
Language	English

Summary

Parts and Functions

Terminal Descriptions

Door Station Mounting

Surface mounting

Details the steps for mounting the door station using the surface mounting method.

Flush mounting

Provides instructions for installing the door station with a flush mounting technique.

System Connection

Door Lock Connections

Internal Power Supply Mode

Explains how to connect the electronic lock using the system's internal 12VDC power supply.

Connection for Power-on-to-Unlock type

Details wiring for electronic locks configured for power-on-to-unlock (Normally Open) operation.

Connection for Power-off-to-Unlock type

Details wiring for electronic locks configured for power-off-to-unlock (Normally Closed) operation.

External Power Supply Mode

Describes connecting the electronic lock when using an external power supply.

Connection for Power-to-Unlock type

Wiring for external power supply, power-to-unlock (Normally Open) mode.

Connection for Power-off-to-Unlock type

Wiring for external power supply, power-off-to-unlock (Normally Closed) mode.

Door Station Configurations

About Room Code (Address)

Explains room codes assigned to each monitor for identification and storage.

About Debug State

Introduces the Debug State as the starting point for using all applications on DMR18S.

About Debug Tools

Provides an overview of the Debug Tools available when working in Debug State.

How to use code unlock function

Change Unlock Code

User Card Management

Specification