V-Tec DMR18S - Code

Item Description
Factory
set
L a ngu a ge  reserved.
0
To n e  S e l e c t  SelectthechimeofDoorStationincallingwaitstate. 01
To n e  V o l u m e 
Adjustthetonevolumefordooorstationincalling.Range
from01~15
3
 U n l o c k  C o d e 
TochangeunlockcodeinCommonCodeUnlockmode,in
4-digitsformat.1111isthedefaultunlockcode.
1111
WorkMode
0:Standardworkmode;
1:DJworkmode;
2:Routerworkmode;
3.Gatewayworkmode.
0
Clock...
Tosetdateandtime.
Dateformat:ifsetto0,dateformatisDD/MM/YY,ifsetto
1,dateformatisMM/DD/YY.
Timeformat:ifsetto0,timeformatis24hourstandard.Ifset
to1,timeformatis12hourstandard.
SetupCode TochangetheProgramCode. [88888888]
About...
1.Hardwareversion---ToshowtheDoorStation(including
ACS)hardwareinformation
2.Softwareversion---ToshowtheDoorStation(including
ACS)softwareinformation
3.ManufactureDate---Toshowthemanufacturingdate
4.DialingCounts---Toshowthecalloperationcounts
5.CallsCounts---Toshowtheestablishedcallingcounts
6.UnlockCounts---Toshowtheunlockoperationcounts
Default...
RestoreallSetupparameterstofactorydefaultsetting,Please
notethatthisoperationisanirreversible
Table3(Setup):
-10-