To Next PageTo Next Page
Need help?Do you have a question about the V2 AYROS 800-230V and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | AYROS 800-230V |
| Category | Controller |
| Language | English |
Ensure compliance with European regulations and use qualified personnel for installation.
Follow safety warnings, use PPE, shut down in hazardous situations, and avoid dangerous environments.
Steps for positioning the motor, assembling clamps, pouring concrete, and levelling the unit on the foundation.
Instructions for mounting the gate rack and securing the motor to the base plate.
Details installation of magnetic limit switches and the manual motor overriding system.
Covers power supply, flashing/courtesy lights, and basic activation input modes.
Details wiring for stop buttons, photocells, safety ribbons, and external aerials.
Presents the main electrical connection diagram and information on plug-in receivers and ADI interfaces.
Using the installation menu for gate movements, automatic learning of limits, and manual handling.
Configuring photocell tests, safety edge tests, and ADI device enabling.
Details possible error codes displayed by the control unit and their causes/remedies.
Key steps for guaranteeing maximum safety during automation device implementation and force adjustment.
