To Next PageTo Next Page
Need help?Do you have a question about the V2 AYROS-24V and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | AYROS-24V |
| Category | Controller |
| Language | English |
Checks and identification of the gate automation type for safe installation and use.
Contact information and procedure for technical support.
Regulatory compliance documentation for the automation device.
Steps and diagrams for correctly positioning the motor for installation.
Instructions and diagrams for mounting the rack onto the gate.
Checks and steps for securely fixing the motor to the anchoring plate.
Guide for installing magnetic limit switches for gate end-of-stroke detection.
Procedure for manually operating the gate when power is absent.
Diagram showing the overall installation layout and component connections.
Instructions for connecting the control unit to the mains power supply.
Information on using the optional battery pack for backup power.
Details on different input types and their functions for gate activation.
How to connect and use a stop switch for immediate gate stoppage.
Instructions for connecting photocells for obstacle detection.
How to connect safety ribbons (edges) for obstacle detection.
Connecting warning or flashing lights to the control unit.
Connecting courtesy lights or garden lights controlled by the system.
Connecting an external aerial to enhance radio signal reception.
Connecting an MR receiver module for radio control functionality.
Connecting optional modules via the ADI interface.
Detailed wiring diagram and terminal connections for the control unit.
Explanation of the control unit display and its indicators.
Guide to using the control unit keys for programming functions and values.
Procedure to automatically learn and set the gate's opening and closing limits.
How to manually move the gate for installation or maintenance.
How the system signals when service is due based on cycle count.
