To Next PageTo Next Page
Need help?Do you have a question about the V2 AZIMUT and is the answer not in the manual?
General| Input Voltage | 24V DC |
|---|---|
| Output Current | 2A |
| Protection Class | IP20 |
| Operating Temperature | -10°C to +50°C |
| Communication Interface | RS485 |
Ensure automation complies with EN regulations for safety, installation, and use.
Installation requires qualified personnel and compliance with national provisions.
Measure and adjust thrust force and obstacle sensitivity according to standards.
Forbidden in dusty, saline, explosive environments; designed for dry rooms only.
Follow all instructions for safety; keep children away from automated doors and transmitters.
Check automation regularly for wear and tear, damages, and unbalancing.
Ensure the door is suitable for automation, stout, and appropriate for installation.
Defines safety levels based on activation commands and closure use types.
Details power supply, absorbed power, door area, speed, force, temperature, protection, and weight.
Lists and labels the main components of the automation system.
Instructions for removing the section bar from packaging and unfolding it.
Slide connecting bars, adjust chain tension using an Allen wrench.
Procedure to set the fully open position using the display and keys.
