V2 AZIMUT User Manual

ENGLISH
- 22 -
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
Press the + key,
the display shows 2
Press the + key,
the display shows 6
Press the + key,
the display shows 3
Press the key:
2 flashes
Press the key: 0 flashes
to indicate that the
function is deactivated
Press the key:
3 flashes - the door opens
Press and hold the
+ (the door opens)
or - (the door closes)
key to reach the fully
close position
Press the + key to activate
the function: the display
shows I
When the door stops, press
the key to confirm.
Press the key once
more to continue - the
door closes
When the door reaches the
closed position press the
key to save the settings
Press the key to save
the settings.
The display shows 6
When the door stops, press
the key to save the
settings.
The display shows 3
9.2 - SETTING THE CLOSE LIMIT SWITCH
9.4 - OPEN ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.
9.3 - SELF LEARNING OF THE FORCES
m PLEASE NOTE: On completion of the procedure, it is
possible to exit the programming procedure, storing the
parameters set: press and hold the key for 5 seconds
until the segments of the display illuminate one at a time
until showing 0

V2 AZIMUT Specifications

General

Brand	V2
Model	AZIMUT
Category	Controller
Language	English