To Next PageTo Next Page
Need help?Do you have a question about the V2 AXIL and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | AXIL |
| Category | Controller |
| Language | English |
Essential safety instructions, European regulations, installer responsibilities, electrical safety, and required skills before installation.
Guidelines for qualified technicians, maintenance procedures, prohibited uses, environmental hazards, and modification warnings.
Procedures for proper dismantling, recycling, handling of hazardous substances, and adherence to local disposal regulations.
Verifying gate condition, balance, and power supply requirements before automation installation.
Delineates safety levels based on user groups and defines activation commands with specific safety protections.
Provides contact details for customer service regarding installation issues and support.
Manufacturer's declaration for partly completed machinery, specifying model, description, intended use, and relevant directives.
Comprehensive table detailing technical parameters for AXIL models including power supply, dimensions, performance, and protection ratings.
Visual representation of the automation system layout with identification of actuators, accessories, and cabling requirements.
Essential checks for gate hinges, movement, obstacles, and latch to ensure proper automation installation.
Detailed measurement tables and diagrams for correct installation of inward opening gates at various angles.
Detailed measurement tables and diagrams for correct installation of outward opening gates at various angles.
Sequential guide for physically attaching the actuator to the gate and pillar, including bracket positioning and bolt fastening.
Procedures for configuring both mechanical and electrical end-stop mechanisms for accurate gate positioning.
Instructions for manually releasing the gate during power failure and restoring normal automated operation.
Detailed wiring diagrams and specifications for connecting power and control circuits for different voltage models.
Guide for connecting motor encoder signals to the control unit for position feedback and operational control.
