EasyManuals Logo

V2 AZIMUT User Manual

V2 AZIMUT
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
ENGLISH
- 23 -
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
30” 60” 90” 120” 150” 180” 210” 240”
Press the + key,
the display shows 7
Press the + key,
the display shows 8
Select the desired pause time using the + and - keys
Press the key to save
the settings.
The display shows 7
Press the key: 0 flashes
to indicate that the
function is deactivated
Press the key: 0 flashes
to indicate that the
function is deactivated
Press the + key to activate
the function: the display
shows I corresponding to
30 seconds
Press the + key to activate
the function: the display
shows I
Press the key to save
the settings.
The display shows 8
9.5 - AUTOMATIC CLOSURE (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device automatically closes the door after the set period of time.
Prior to closing the door, the device emits BEEPs for 20 seconds.
ATTENTION: to activate this function the photocell must work correctly.
If the photocell is not installed, the terminal must be bridged with the common.
9.6 - MAINTENANCE ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs when the motor reaches 2000 operational cycles.
This alarm may be useful for scheduling maintenance operations.
To interrupt the alarm , simply press and hold the START button for 5 seconds, or power off the device for several seconds.
+
-
+
-
+
-
+
-
Press the + key,
the display shows 9
Press the key:
0 flashes to indicate that
the function is deactivated
Press the + key to activate
the function: the display
shows I
Press the key to save
the settings: the display
shows 9
9.7 - CONDOMINIUM FUNCTION (DEFAULT: 0 - FUNCTION DISABLED)
m CAUTION: To enable the condominium function it is necessary to activate the automatic closing
The condominium function provides the following operation logics:
1 - during the opening phase any start command is ignored
2 - during a pause a start command re-charge the pause time
3 - during the closing phase a start command causes the door movement to reverse

Table of Contents

Other manuals for V2 AZIMUT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the V2 AZIMUT and is the answer not in the manual?

V2 AZIMUT Specifications

General IconGeneral
BrandV2
ModelAZIMUT
CategoryController
LanguageEnglish

Related product manuals