V2 BINGO400 - Page 5

ENGLISH
9
To carry out a proper installation of the operator parts as well as
to ensure the best automation performance, the measurement
levels shown in the following table shall be complied with.
Change the gate structure to adapt it to one of the cases in the
table, if necessary.
 WARNING: In the case of leaf longer than 2,5 metres,
a
n electric lock must be fitted to ensure an efficent closig.
 WARNING: In order to avoid contatcts of the operator
against the shutter, it is necessary to keep as much exactly
as possible the height D taking into consideration a margin
between 0 and +5mm.
γ
A [mm] B [mm] C [mm] D [mm] E [mm]
90°
40 160 150 140 795
50 170 150 140 795
60 180 160 140 785
70 190 160 140 785
80 200 160 140 785
90 210 160 140 785
100 220 160 140 785
110 230 160 140 780
120 240 160 140 780
130 250 160 140 780
140 260 160 140 780
150 270 150 140 790
160 280 150 140 785
100°
40 160 190 140 755
50 170 190 140 755
60 180 190 140 755
70 190 190 140 755
80 200 190 140 755
90 210 190 140 755
100 220 190 140 755
110 230 185 140 760
120 220 190 140 750
130 230 185 140 755
110°
40 160 220 140 725
50 170 220 140 725
60 180 220 140 725
70 170 210 130 730
80 180 205 130 735
BINGO400
γ
A [mm] B [mm] C [mm] D [mm] E [mm]
90°
20 140 130 120 695
30 150 160 140 665
40 160 160 140 665
50 170 160 140 665
60 180 150 140 675
70 190 150 120 675
80 200 140 120 685
90 210 130 120 690
100 220 125 120 695
110 210 130 120 690
100°
20 140 165 120 660
30 150 160 120 660
40 140 160 120 660
50 150 160 120 660
60 160 155 120 660
70 160 145 110 670