To Next Page

To Previous Page

ENGLISH

6. Check that the tube is perfectly horizontal and

perpendicular as to the telescopic arm, then cut the

part of exceeding tube

7. Drive the door to its max. opening position and cut

the

g 1

upper part of the telescopic arm so that there

is a

g 2

100-mm lower part projection by the upper

side

8. Drive the door to its closing position and cut the

telescopic arm lower part so that the

g 3

inner part

is of 100 mm

Questions and Answers:

Need help?

Do you have a question about the V2 VEGA-C 230V and is the answer not in the manual?

V2 VEGA-C 230V Specifications

General