10
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | VacMasterFresh.com | 800-821-7849
VP95 Chamber Vacuum Sealer | User Guide
VP95 will not turn on -
▫ Make sure the machine is properly plugged into a grounded outlet.
▫ Check the power cord for tears and frays. Do not use this machine if
the power cord is damaged.
▫ Make sure the power switch is turned on. The LED screen will be
illuminated when on.
▫ If you see ‘ERR’ displayed on the LED screen and the machine will not
function, make sure the lid is open and turn the power off. Turn the
machine back on and it should return to working order.
VP95 does not pull a complete vacuum with pouch -
▫ The vacuum time may not be set high enough. Set the vacuum time
higher and vacuum again.
▫ The seal bar, seal pad, lid gasket and vacuum pouch need to be
clean, dry and free of debris for the vacuum process to be successful.
Wipe surface of the seal bar, seal pad, lid gasket and the inside of
the pouch and try again.
Vacuum pouch loses vacuum after being sealed -
▫ Sharp items can poke small holes in pouches. To prevent this, cover
sharp edges with VacMaster
®
Bone Guard and vacuum in a new pouch.
▫ Some fruits and vegetables can release gases (out-gassing) if not
properly blanched or frozen before packaging. Open the pouch.
If you think food spoilage has begun, discard the food. If food
spoilage has not yet begun, consume immediately. If in doubt,
discard the food.
VP95 is not sealing pouch properly -
▫ The seal time may not be long enough. Increase the seal time and
try again.
▫ Pouches will not seal if any moisture, food particles or debris are
present in the seal area. Wipe the inside of the pouch clean and
try again.
▫ Pouches must be properly placed along the seal bar. Make sure the
entire pouch is over the seal bar and there are no wrinkles in the
pouch material.
If problems persist, contact customer support at
(800) 821-7849 for further assistance.
Troubleshooting
To Next Page
Loading...
