vacuubrand ME 4C NT User Manual (English)

Questions and Answers:

T
tiffany34Aug 11, 2025
What to do if my vacuubrand ME 4C NT doesn't start?
- S
  Sharon CuevasAug 12, 2025
  If your vacuubrand Water Pump doesn't start, it could be due to several reasons. First, ensure the electrical power cord is properly plugged in. Also, check the device fuse to see if it has blown. Overpressure in the outlet line or a motor overload could also be the cause. If the motor is overloaded, allow it to cool down, identify, and eliminate the cause of the failure. A manual reset might be necessary, so switch off the pump or unplug it.
R
Robert PetersonAug 27, 2025
How to fix a noisy vacuubrand Water Pump?
- C
  Christopher Powers DDSAug 27, 2025
  A noisy vacuubrand Water Pump can be caused by atmospheric or high pressure at the pump inlet. Try connecting a hose or silencer to the pump outlet, being careful not to cause outlet over-pressure, especially with condensable vapors. Another cause could be a diaphragm crack or a loose diaphragm clamping disc, in that case perform maintenance. If the cause is something else, contact your local distributor.
D
Dana RushSep 3, 2025
What to do if vacuubrand Water Pump does not start?
- W
  Whitney BraySep 3, 2025
  If your vacuubrand Water Pump fails to start or stops immediately, it could be due to several reasons: * The electrical power cord might not be plugged in. * There could be an electrical supply failure. * The device fuse might be blown. * There might be overpressure in the outlet line. * The motor could be overloaded. Here are some steps to take: 1. Ensure the power cord is properly plugged in. 2. Check the fuse and replace it if necessary. 3. Identify and address the cause of the failure. 4. Remove any blockage in the line and open the valve. 5. Allow the motor to cool down, then identify and eliminate the cause of the overload. A manual reset may be necessary. Switch off or unplug the pump.

vacuubrand ME 4C NT Specifications

General

Ultimate Vacuum	33 mbar
Motor Power	0.37 kW
Permissible ambient temperature	40 °C
Permissible cooling water temperature	max. 25 °C
Voltage	230 V
Frequency	50-60 Hz