General Notes
Ensure registration of individual components within a pack instead of the pack itself
when registering your guarantee.
Ensure system wiring adheres to the relevant Vaillant schematic diagram.
Check eBus polarity on all connections.
Ensure isolation at relevant electrical points.
Terms and Conditions for Vaillant Schematic Diagrams
All applicable laws and regulations must be followed.
The Diagram may be subject to alteration at any time.
Vaillant is not responsible for any inaccuracies or omissions in the information and
drawings provided to it and upon which it relies when constructing the diagrams.
Any reproduction of the design must have the prior permission of Vaillant.
During the planning, design, installation and later use of the system, all operating
instructions must be followed.
In no circumstances shall Vaillant be liable to you or any other third parties for any
loss or damage (including, without limitation, damage for loss of business or loss of
profits) arising directly or indirectly from your use of or inability to use, this diagram.
Vaillant makes no representations or warranties of any kind, express or implied about
the completeness, accuracy, reliability or suitability of the diagram for any purpose.
Any reliance you place on the diagram is therefore strictly at your own risk.
These disclaimers and exclusions shall be governed by and construed in accordance
with English law.
To Next Page
Loading...
