2
General Notes
• Ensure registration of individual components within a pack instead of the pack
itself when registering your guarantee.
• Ensure system wiring adheres to the relevant Vaillant schematic diagram.
• Check eBus polarity on all connections.
• Ensure isolation at relevant electrical points.
Terms and Conditions for Vaillant Schematic Diagrams
• All applicable laws and regulations must be followed.
• The Diagram may be subject to alteration at any time.
• Vaillant is not responsible for any inaccuracies or omissions in the
information and drawings provided to it and upon which it relies when
constructing the diagrams.
• Any reproduction of the design must have the prior permission of Vaillant.
• During the planning, design, installation and later use of the system, all
operating instructions must be followed.
• In no circumstances shall Vaillant be liable to you or any other third parties
for any loss or damage (including, without limitation, damage for loss of
business or loss of profits) arising directly or indirectly from your use of or
inability to use, this diagram.
• Vaillant makes no representations or warranties of any kind, express or
implied about the completeness, accuracy, reliability or suitability of the
diagram for any purpose. Any reliance you place on the diagram is therefore
strictly at your own risk.
• These disclaimers and exclusions shall be governed by and construed in
accordance with English law.
To Next Page
Loading...
Need help?
General