Need help?Do you have a question about the Vaillant VUW 306/6-3 and is the answer not in the manual?
General| Fuel Type | Natural Gas / LPG |
|---|---|
| ErP efficiency class (heating) | A |
| ErP efficiency class (DHW) | A |
| Weight | 36 kg |
| Efficiency | 94% |
| Type | Wall-mounted boiler |
| DHW Output | 30 kW |
Classifies action-related warnings by severity using warning signs and signal words.
Defines the product's intended purpose and restrictions for safe operation.
Provides essential safety guidelines, including risks from inadequate qualifications and escaping gas.
Provides guidance on safely lifting and transporting the unit, noting its weight.
Details the procedure and considerations for wall-mounting the product.
Details precautions and procedures for making gas and water connections.
Guides on connecting the condensate discharge pipe, including material suitability and drainage requirements.
Details steps for safely establishing the product's power supply.
Outlines the process for initial start-up, requiring a checklist.
Details procedures for checking heating water quality and treating it.
Warns about risks related to insufficient water pressure and how to avoid them.
Step-by-step guide for filling and purging the heating installation.
Describes how to check the gas flow rate using check programme P.01.
Details checks related to the gas setting and gas connection pressure.
Instructions for checking the leak-tightness of the system.
Explains how to adjust the speed-regulated pump output.
Instructions for setting the domestic hot water temperature, including legionella prevention.
Provides guidance on completing the handover process to the end user.
Guides on identifying and resolving faults using check programmes and fault messages.
Outlines essential safety steps before undertaking repair work.
Instructions for verifying the product's leak-tightness.
Procedures for checking and setting the CO2 content.
Details how to adjust the CO2 content if it is outside the specified range.
Lists and explains various diagnostics codes for product parameters.
Provides an overview of status codes displayed during heating and DHW modes.
Lists fault codes, their meanings, and possible causes.
Illustrates the wiring connections for the combi boiler.
Shows the wiring diagram specifically for the 35 kW combi boiler model.
Lists required inspection and maintenance tasks and their intervals.
Provides a checklist for commissioning the boiler to ensure compliance and warranty activation.
To Next Page
