Vaillant VRT 350 - Basic Settings

Operating 4
0020135485_00 VRT 350 Operating instructions 13
Basic settings
LanguageLanguage
Date / TimeDate / Time
Display
Back
Select
Image 4.9: Selection level 2: «Date/Time»
6. Press the right-hand selector button, «Select».
◁ The controller is now in the «Date» setting level. The
value for the day is highlighted. The left-hand se-
lector button now has the function «Back» (to the
next selection level up), the right-hand selector but-
ton has the function «Change» (the value).
Date / Time
Time
Date
Daylight saving
:1508
13.03.11
Off
Back
Change
Image 4.10: Setting level: Value for day is highlighted
7. Press the right-hand selector button, «Change».
◁ The highlighted value starts to flash; you can now
change the value by turning the rotary knob.
◁ The left-hand selector button now has the function
«Cancel» (the change), the right-hand selector but-
ton has the function «OK» (to confirm the change).
Date / Time
Time
Date
Daylight saving
:1508
13.03.11
Off
Cancel
OK
Image 4.11: Setting level: Accept the changed value
8. Turn the control knob to change the value.
Date / Time
Time
Date
Daylight saving
:1508
14.03.11
Off
Cancel
OK
Image 4.12: Setting level: Change has been saved
9. Press the right-hand selector button, «OK», to confirm
the change.
◁ The controller has stored the modified date.
Date / Time
Time
Date
Daylight saving
:1508
14.03.11
Off
Back
Change
Image 4.13: Setting level: One level back
10. If the highlighted value that is flashing is correct, press
the right-hand selector button «ok» again.
◁ The left-hand selector button now has the function
«Back».
11. Press the left-hand selector button, «Back» several
times to switch back to the next selection level up and
to access the basic display from selection level 1.