20 Operating manual VRT 360f
Display Required steps
Energy-saving function
The energy-saving function lets
you lower the heating for an
adjustable period regardless
of the set heating programme.
Press the special function
button twice and the energy-
saving symbol appears on the
display. You will also see the
time flashing. Now turn the dial
to set the end time up to which
the heating is operated in set-
back mode. The display switches
back to basic mode after 10
seconds and the function is
activated. To deactivate the
function, all you need to do is
press the F button.
Display Required steps
Party function
When you activate the party
function the heating phase is
continued beyond the next set-
back phase. This also applies to
the hot water and circulation
pump programmes. Press the
special function button three
times. The party symbol appears
in the display and the function is
activated after ten seconds.
The function is deactivated
automatically by reaching the
next heating phase.
If you want to deactivate the
function before, just press the F
button. This function can only be
activated in automatic mode
.
4 Operation
To Next Page
Loading...
