Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 55
0201-020
Figure 37 Battery Connectors
5. Rotate the tube to find the correct aligning pin (1) position. Slide
the tube up. Tighten it with two hand screws (2). To keep the
tube watertight, the tube should cover the two O-rings (1 & 2)
on the bottom of the upper base.
0201-021
Figure 38 Aligning Pin and Hand Screws
0201-022
Figure 39 O-rings for Sealing the Tube
To Next Page
Loading...
