User's Guide ______________________________________________________________________
30 __________________________________________________________________ M210295EN-H
2. Take out the battery connector (number 1 in Figure 19 on page 30)
by gently pulling the wires.
0912-140
Figure 19 Battery Connector Shown with RSB611
3. Connect the battery connector to the radiosonde.
0705-039
Figure 20 Connecting the Battery Connector to the
Radiosonde
4. The radiosonde has now been activated. Close the battery case.
5. Check from the sounding system software that the telemetry link is
working well. For detailed instructions on using the sounding
software, refer to the sounding system documentation.
To Next Page
Loading...