Vaisala Radiosonde RS92-SGP - Figure 24 Placing Battery Connector into Connector Holder, Part 2

Chapter 3 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 33
4. Place the battery connector (1) onto the connector holder pins (2)
of the battery case. The white pins (3) must face away from the
batteries.
Figure 24 Placing Battery Connector into Connector
Holder, Part 2
CAUTION
The white plastic pins must face away from the batteries, see Figure 24
on page 33.
CAUTION
The wires at the connector end must be located between the connector
holder and the batteries, as shown in Figure 24 on page 33, not between
the connector holder and the outer wall of the battery case.
All manuals and user guides at all-guides.com