User's Guide ______________________________________________________________________
34 __________________________________________________________________ M210295EN-H
5. Connect the battery connector to the radiosonde, see Figure 25 on
page 34.
0705-039
Figure 25 Connecting the Radiosonde to the Battery Case
6. Close the battery case by snapping the battery case and the
radiosonde together so that all sides are closed tightly.
0910-094
Figure 26 Pressing Battery Case and Radiosonde Together
NOTE
Make sure the battery connector stays connected into the connector
holder all the time. If it becomes loose, battery activation will not work
properly.
To Next Page
Loading...