Val Controls IHP24-BF User Manual

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
37/58
Description: The high and low values engineering
units code and number of digits of the right of the
decimal point to be used in displaying the OUT
parameter and parameters which have the same scale
out.
GRANT_DENY
[Options]
12
1: Grant
Length 1 byte
Read Write
Value: 0
2: Deny
Length 1 byte
Read Write
Value: 0
Program Denied – Granting of program permission
has been reset
Tune Denied – Granting of tune permission has been
reset
Alarm Denied – Granting of alarm permission has
been reset
Local – Granting of local permission has been reset
Description: Options for controlling access of host
computers and local control panes to operating
tuning and alarm parameters of the block.
IO_OPTS
[Options]
13
Length 2 byte
Read Write
Value 0x0000
Description:
Option which the user can select to alter Input and
Output block processing
Only the Low cutoff can be enabled/disabled
STATUS_OPTS
[Options]
14
Length 2 byte
Read Write
Value 0x0000
Description: Option which the user can select block
processing of status.
CHANNEL
[Process]
15
Length 2 byte
Read Write
Description: The channel to get the value to the
Block from.
L_TYPE
[Scaling]
16
Length 1 byte
Read Write

Val Controls IHP24-BF Specifications

General

Brand	Val Controls
Model	IHP24-BF
Category	Valve Positioners
Language	English