Valley Electronics Lady-Comp - Temperature Self-Test; Device Information Display

32
33
Device information includes:
– The device serial number
(13547206).
– The software version
designated by the last two
numbers (-31).
– The battery display.
– Brightness displayed as a
percentage.
If the device has an error or a
warning, this will be displayed.
For a list of possible errors see
page 38.
“Return” illuminated
Signal tone indicates
end of measurement
The thermometer starts
to blink automatically
Press “ok”
“Return”
Please measure
Temperature self test
Device information
“Return” illuminated
Press “ok”
“Return”
The temperature self-test can be conducted to see if the temperature
sensor is working properly. The self-test can be canceled by pressing
and holding the “OK” button for 3 seconds.
Important Note: