Valmar EASY 3 TTi User Manual

58
 place the beater on a solid surface and remove each of the 3 slidere from
the beater individually (push the slider downwards until it releases fron
the shaft);
 after removal each slider must be very carefully inspected for wear and
deformations;
 remove the shaft seal from the beater (in the case, the shaft seal is
cracked, worn or inelastic it has to be replaced by a new seal);



SLIDER
Ordering code - 10240020

Valmar EASY 3 TTi Specifications

General

Brand	Valmar
Model	EASY 3 TTi
Category	Ice Cream Maker
Language	English