Valmar EASY 3 TTi User Manual

59
 if you notice drops of ice cream mixture in the collector, which can be
accessed on the right side of the machine, you must replace the shaft
seal with a new one;
 Remove the chute from the appliance by shifting it counter clockwise to
the right and detaching;
 Inspect all seals (cover, door and beater shaft). If any of the seals is
cracked, worn or has lost elasticity, it must be replaced with a new one;
 All removed parts must be washed in lukewarm water with non foaming
detergent. You may scrub the parts with brush with plastic bristles. It is
forbidden to use abrasive sponge or brush as it may damage the surface.
 It is strictly forbidden to wash the plastic parts of the appliance in a
dishwasher!





Valmar EASY 3 TTi Specifications

General

Brand	Valmar
Model	EASY 3 TTi
Category	Ice Cream Maker
Language	English