3
WARNING
DO NOT TOUCH THE BARRIER SCREEN,
THE FRONT or THE GLASS WHILE THEY ARE
HOT! Let the fireplace cool first before
maintenance.
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fireplace front
after maintenance.
Installation
1. Hook the bottom cover to the brackets inside the
outer surround trim already installed on the heater.
2. Hook the window trim to the window frame as
indicated.
Front view—Window
frame with window trim
Slide window
trim tabs
into slots on
window frame
window trim
window
frame
slot
tab
Rear view, top of
window frame
3. Hook the trim assembly to the brackets inside the
outer surrount trim.
Maintenance
To clean the front trim, use mild soap and water. You
can dust the screen with a soft bruxh. To brush the back
of the screen, simply unhook the front trim.
If the barrier screen becomes damaged, the barrier
shall be replaced with the manufacturer’s barrier for
this appliance.
To clean the glass window and the inside of the firebox,
see the Owner’s Information section of the Installation
and Owner’s Manual supplied with the fireplace.
To Next Page
Loading...
Need help?
General
