989
Model Code Page
64. Powered front axle
8. 11. 1990
6000--8750 644 7
E. Fitti ng front axle
1. When the backlash is correctly adjusted unscrew the axle
housing joint and check the condition of the o---ring.
2. Change the o---ring if necessary and apply grease to it.
3. Connect the bolt ed joint of the axle housing. Tighten the at-
taching screws to a torque of 190 Nm.
4. Attach the tie---rod to the steering arm.
5. Fit the front axle (see Op no 641 C). Fill the differential
housing with oil.
To Next Page
Loading...
