1000
Model Code Page
65. Industrial front axle
1. 1. 1995
6000--8750 651 6
Tapered joint between tie---rod and steering arm
Material 41CrMo4
Taper 1:10
ø37 H7/r7
R32
ø48
ø32
--- 0 , 1 , --- 0 , 2
ø40
430---0,13
35---0,20
The tie---rod end has been strengthened. Taper ø 32 mm (was
ø 26 mm), joint ball ø 40 mm (was ø 35 mm). At the same time
the steering arm has been modified in the corresponding way.
The modified steering knuckle and the tie---rod are in pairs
exchangeable with each others. This modification is in pro-
duction with effect from axle number 0116/94.
The earlier steering knuckle can be rapaired by machining a
spaceforabody---fitsleeve(seepictureabove).Therepair
work can be done in the tractor factory, if necessary.
To Next Page
Loading...
