Need help?Do you have a question about the Vanderbilt ACT 5e prox and is the answer not in the manual?
General| Technology | 125kHz Proximity |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Mounting | Surface Mount |
| Type | Proximity reader with keypad |
| Compatibility | ACT access control systems |
| Tamper | Built-in tamper switch |
| Audible Feedback | Yes |
| Communication Interface | Wiegand |
| Keypad | 12-button tactile keypad |
Details technical specifications including user capacity, voltage, current, temperature, and relay load ratings.
Instructions for modifying or assigning personal identification numbers to users.
Steps to register proximity cards or fobs for user access.
Procedure to update the master code for accessing programming functions.
Configuration of how long the door release mechanism remains active.
Defines how relays operate, e.g., timed or toggle mode.
Guide for removing a specific user's assigned proximity card.
Procedure to remove a card number from the system without user association.
Function to verify if a user account lacks a PIN code.
Function to verify if a user account lacks an assigned card.
Configuration of various system options like backlighting and access modes.
Instructions for resetting the unit to its original factory settings.
Electrical schematic for connecting the unit to a strike lock.
Electrical schematic for connecting the unit to a magnetic lock.
Visual guide and steps for mounting the unit on a surface.
Visual guide and steps for mounting the unit flush with a wall.
Specific instructions for mounting the unit to a UK pattress box.
To Next Page
