Need help?Do you have a question about the Vanderbilt ACT 5e and is the answer not in the manual?
General| Power Supply/Operating Voltage | 12-24V DC |
|---|---|
| Weight | 150g |
| Ingress Protection | IP65 |
| Housing Material | Polycarbonate |
| Type | Keypad |
| Communication | RS485 |
| Current Consumption | 100mA |
| Operating Temperature | -20°C to +55°C |
| Reader Technology | 125kHz Proximity |
Procedure to modify user PIN codes for the ACT 5e keypad.
Guide to setting the relay to operate in toggle mode.
Instructions for defining the duration the relay remains active.
Steps to adjust the keypad backlight behavior and settings.
Procedure to reset the ACT 5e keypad to its factory default settings.
Schematic illustrating the electrical connections for the ACT 5e keypad.
Step-by-step guide for mounting the ACT 5e keypad using the surface mount option.
Instructions for installing the ACT 5e keypad using flush mounting.
To Next Page
