6.2 ACT 5e prox wiring diagram for mag lock
Notes:
l This illustration shows wiring for normally de-energised locks. If normally energised locks are
required use the N/C relay contacts.
l The ACT 5e prox may be powered from 12 or 24V AC or DC.
A Power up without link if programming code has been lost.
B IMPORTANT: Always place varistor across lock terminals.
C Door Release button
D Magnetic Lock 1
E Magnetic Lock 2
ACT 5e prox – Installation and Operating Instructions Wiring and Mounting Diagrams
© Vanderbilt 2019 14 A-100512-e
25.06.2019
To Next Page
Loading...
