Need help?Do you have a question about the Vanderbilt PP500-Cotag and is the answer not in the manual?
General| Type | Proximity Card Reader |
|---|---|
| Technology | Cotag |
| Frequency | 125 kHz |
| Compatibility | Cotag cards and tags |
| Housing | ABS Plastic |
| Communication Interface | Wiegand, Clock & Data |
| Operating Temperature | -20°C to +55°C |
Provides information about the document's scope and limitations.
Details compliance with European Directives and relevant standards.
Lists the operational reading ranges for different card technologies.
Describes the device's behavior upon power activation, including default configuration.
Explains how BCLINK configuration determines reader address for entry/exit.
Details how to enter programming mode and its visual indicators.
Specifies the duration before the reader exits programming mode automatically.
Describes the method to manually cancel programming mode.
Outlines selecting pre-defined interface configurations using short codes.
Provides instructions for mounting the reader at a suitable height and securing it.
Details wiring connections for DC22/DC12 door controllers using BCLINK.
Explains how to connect to a DC800 door controller for stand-alone use via BCLINK.
Describes connecting to Granta 4422 using Wiegand interface and A2 configuration.
Outlines connecting to ADD5100 Dual Reader Interface using Wiegand and A2 configuration.
To Next Page
