Name: Vanderbilt PP500-Cotag
Brand: Vanderbilt
Rating: 5 (1 reviews)

To Next Page

To Previous Page

PP500 Installation Guide 11

ENG

Preset Congurations (short commands)

In programming mode, you can select different

congurations by using short codes. After select-

ing the pre-dened conguration the reader will

return to programming mode.

These are key presses and after pressing A there

is only one key press between values 0 to 9.

Com-

mand

Function

A1 Precongured interface BCLINK (for

Vanderbilt Entro)

A2 Precongured interface 12 (26 bit

Wiegand)

A3 Precongured interface BE (Clock &

Data)

A4 Precongured interface 59 (48 bit

Wiegand for Granta)

The Precongured interfaces is stored in non-vola

tile memory. Any other parameters such as LED

control and horn control will be dened later and

will only apply for A2, A3 and A4.

A3 Precongured is interface BE (Clock & Data),

with external control of Red LED, Green LED and

Horn. Also, the yellow LED is not active at all,

showing no indication of noise or key presses.

Questions and Answers:

Need help?

Do you have a question about the Vanderbilt PP500-Cotag and is the answer not in the manual?

Vanderbilt PP500-Cotag Specifications

General