EasyManuals Logo

Vanderbilt PP500-Cotag User Manual

Vanderbilt PP500-Cotag
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12 PP500 Installation Guide
ENG
Installation
Mechanical
Please mount the reader at a suitable height also
catering for disabled persons.
1. Open the reader with the key supplied. The
lock is located beneath the keypad.
2. Fasten the back plate against the wall, using
three screws , and according to gure
1. Seal the screw and cable holes with sealant
if the reader is externally mounted.
3. Make sure the back plate is earthed. Use a
separate cable to the earthing point. Make
sure the front and back plates are connected
with an insulated cable.
4. Fit the front and check that the reader is se-
curely fastened.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt PP500-Cotag and is the answer not in the manual?

Vanderbilt PP500-Cotag Specifications

General IconGeneral
BrandVanderbilt
ModelPP500-Cotag
CategoryCard Reader
LanguageEnglish

Related product manuals