Need help?Do you have a question about the Vanderbilt VR20M-MF and is the answer not in the manual?
General| Brand | Vanderbilt |
|---|---|
| Model | VR20M-MF |
| Category | Card Reader |
| Language | English |
Technical specifications for the VR20M-MF reader in standard mode.
Technical specifications for the VR50M-MF reader with keypad.
Provides guidance on maximum cable lengths for OSDP and Wiegand connections.
Declares compliance with European directives and provides contact for EC Declaration of Conformity.
Illustrates and lists the individual physical components of the Mullion reader.
Lists the items included in the package with the Mullion reader.
Details the steps for securely mounting the reader base to a wall.
Explains how to mount the reader when cables are routed from the side.
Guides on how to connect the reader's cables.
Explains how to set jumpers for OSDP/Wiegand mode and EOL status.
Details jumper settings and connection for OSDP mode.
Details jumper settings and connection for Wiegand mode.
Details the steps to detach the terminal blocks from the reader base.
Describes the functionality and use of the 3CT configuration tool.
Explains how to change the burst mode using the reader's keypad.
Step-by-step guide for connecting the reader to SiPass using OSDP.
Instructions for setting the OSDP address for the reader within SiPass.
Instructions for connecting the reader to SiPass using Wiegand protocol.
Step-by-step guide for connecting the reader to ACT using OSDP.
Details how the ACTpro controller assigns OSDP addresses and how to identify readers.
Instructions for connecting the reader to ACT using Wiegand protocol.
To Next Page
