5.2 Mounting a reader with cables fed from the side
If the cables are fed from the side:
1. Remove the gasket from the base.
2. Identify which of the knock outs the cables should be fed through.
3. Use a pliers to pull the knock out away from the base.
4. Remove the corresponding knockout on the cover.
5. Attach the base to the wall with three screws: one in the middle at the top of the base and one in
each of the corners at the bottom of the base.
Mullion Reader – User Manual Mounting and connecting
© Vanderbilt 2018 11
A-100410
21.06.2018
To Next Page
Loading...
