EasyManuals Logo

Vanderbilt SPC4 Series User Manual

Vanderbilt SPC4 Series
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #337 background imageLoading...
Page #337 background image
NOTICE: SPC Manager modes cannot be changed if global users exist on the system.
17.12 File Operations
To perform operations on the panel files and configuration:
l Select File.
The following tabs are displayed:
Upgrade Options for upgrading the controller and peripheral firmware, and languages on the
panel. See File Upgrade Operations below.
File
Manager
Options for managing the system configuration file and uploading and downloading
users data to and from the panel. See File Manager Operations on page341.
Audio Upload an audio file to the SPC. Click Browse and click Upload to add the audio
file to the SPC. After upload, click the Test button to validate the audio file.
Default Restores the SPC system to factory defaults.
NOTICE!The IP address is maintained for connecting to the web interface
after a factory default from the web page.
Reset Restarts the panel.
Policy
Text
This tab summarises the configuration for your SPC product settings based on
selected Region, Grade and Type.
17.12.1 File Upgrade Operations
To upgrade firmware and languages on the system:
l Select File > Upgrade.
The following page is displayed:
See also
Options on page252
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 337 A6V10276959-d
11.2018

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt SPC4 Series and is the answer not in the manual?

Vanderbilt SPC4 Series Specifications

General IconGeneral
BrandVanderbilt
ModelSPC4 Series
CategoryPower Supply
LanguageEnglish

Related product manuals