EasyManua.ls Logo

Vanguard V5 User Manual

Vanguard V5
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V5
Operator’s Manual
Fire Alarm Panel
(AVF&LCD)
Question and Answer IconNeed help?

Do you have a question about the Vanguard V5 and is the answer not in the manual?

Vanguard V5 Specifications

General IconGeneral
BrandVanguard
ModelV5
CategorySmoke Alarm
LanguageEnglish

Summary

GENERAL

Introduction

Provides basic operator information on the control and operation of the Fire Alarm System.

System Description

Details the Vanguard V5 Fire Alarm Panel, its components, and operational basis.

Zone Detection Module

Explains the Zone Detection Module indicators, controls, and zone status.

System Control Module

Details the System Control Module indicators and control switches.

LCD Event Logging Module

Describes the LCD Event Logging Module, its indicators, and control switches.

OPERATING INSTRUCTIONS

Normal Operating Conditions

Details the expected status and indicators during normal system operation.

Fire Alarm Condition

Explains the panel's behavior and indicators during a fire alarm event.

Silencing Alarm Bells and Sounders

Provides steps to silence alarm bells and sounders during a fire alarm condition.

Resetting System After Alarm

Details the procedure for resetting the system after an alarm condition is resolved.

Fault Conditions

Describes how the system indicates and handles various fault conditions.

Silencing Fault Buzzer

Explains how to silence the fault buzzer when a fault occurs.

Resetting System After Fault

Outlines the process for resetting the system after a fault is rectified.

Initiating and Silencing Evacuate Alarm

Describes initiating and silencing the evacuate alarm procedure for emergencies.

Zone and Auxiliary Disable

Explains how to disable specific zones or auxiliary functions.

Indicators Test and Alarm Verification (AVF)

Guides on testing indicators and the Alarm Verification Feature (AVF).

LCD Event Logging Module (LLM)

Describes the LLM for displaying and recording alarm zone information with date/time.

LLM MENU Function

Details the MENU function for operating the LCD Event Logging Module.

View Fire Archive

Instructions on how to view recorded alarm zone events from the archive.

Print Fire Archive

Steps to print recorded alarm zone events from the archive.

Panel Setup Options

Guides on how to set up the panel, including address, time, and date.

ROUTINE MAINTENANCE

Maintenance Introduction and Responsibilities

Covers system maintenance importance, owner responsibilities, and operator log duties.

Regular Testing and Inspection

Overview of recommended regular testing and inspection procedures for the system.

Daily Maintenance Check

Procedure for daily checks to ensure the system is operating normally.

Weekly Maintenance Test

Tests and checks to be performed weekly for system performance and function.

Monthly Maintenance Test

Additional checking and testing procedures to be carried out monthly.

Annual Maintenance Test

Annual checks including all previous tests and specific annual procedures.

FAULT FINDING TIPS

TECHNICAL SPECIFICATION & INSTALLATION DIAGRAM