Vankyo Performance H300A - Page 10

10
Projector Connection & Input Source
Connect your device to the projector correctly, then select the right input source.
USB Connection
To play files stored on a USB disk, insert the disk into the projector first.
Option 1: Press the Input Source Button on the remote, then select USB as the input
interface to play the desired file.
Option 2: Go to Homepage > Setting > USB to play the desired file.
Option 3: Go to Homepage > Apps > My apps > FileManager to play the desired file.
HD Connection
 Turn on the projector, then connect the projector to your device with the provided
HD cable.
 Press the Input Source Button on the remote, then select HDMI as the input
interface. The content of your device will be displayed on the screen/wall.
AV Connection
 Turn on the projector and connect your device to the AV Port of the projector with
the AV cable.
 Press the Input Source Button on the remote, then select AV as the input interface.
The content of your device will be displayed on the screen/wall.
Homepage
Go to the Homepage and select your preferred platform, then log into your account to play
the corresponding content.
Wi-Fi Connection
Go to Homepage > Setting > Setting > Network Settings to connect the projector to
your router’s Wi-Fi.