Vankyo Performance H300A - Other Settings

13
Settings
Network Setting
 Connect the projector to a working Wi-Fi network.
Bluetooth Setting
 Connect the projector to an external Bluetooth speaker or Bluetooth headphones.
Projection Settings
 Change Projection Mode among Front-Desktop, Rear-Desktop, Front-Ceiling,
and Rear-Ceiling.
 Correct the Keystone and adjust the focus manually or automatically.
 Digital Zoom: change the image size from 50% to 100%.
 Correction Settings:
o Select Trapezoidal Correction Reset to restore the projected image to its
original state.
o Enable/disable Auto Keystone Correction at Power on and Power on
Auto Focus.
 Turn on Automatic Obstacle Avoidance to enable the projector to avoid
obstacles.
 Turn on Automatic Screen Fit to enable the projected image to automatically
match the screen.
 Factory Reset: Restore the projector to the factory settings.
Other Settings
 Input Source Options: Choose HDMI, AV, or Off as the initial input source for your
projector’s startup.
 Power On Option
 Direct: The projector will power on directly when you plug its power cord into an
electrical outlet.
 Standby: You need to press the Power button to turn the projector on when you
plug its power cord into an electrical outlet.
 Language Setting: Select a language for the projector.
 Scheduled Shutdown: Set the time duration for the projector to shut down
automatically. Options include Off, 10 min, 20 min, 30 min, 60 min, 90 min, 120 min,
180 min, and 240 min.
 About: Check the System Version, Memory, ROM, MAC Address, and System
Temperature of the projector.