11
Screen Mirroring
For iOS System
Step 1: Connect the projector and your mobile device to the same router’s Wi-Fi.
Step 2: Go to Homepage > Apps and select iOSCast under My apps to display the
following interface.
Step 3: Activate Screen Mirroring/AirPlay Mirroring on your iOS device and search for
the projector.
Step 4: Select Vankyo-XXXX from the searching list to connect.
Step 5: The content on your iOS device will be mirrored to the wall/screen.
For Android System
To activate this function, please make sure your Android device supports Multi-
screen/Wireless display/SmartView. Names may differ from one Android device to
another.
Step 1: Turn on the Wi-Fi switch on your Android device.
Note: A successful Wi-Fi connection is not a must, but please make sure the Wi-Fi switch in
your Android device is on.
Step 2: Go to Homepage > Apps and select Miracast under My apps to enter the
following interface.
Step 3: Activate Multi-screen/Wireless display/Smart View function on your Android
device and search for the projector.
Step 4: Select Vankyo-XXXX from the searching list to connect.
Step 5: The content on your Android device will be mirrored to the wall/screen.
Bluetooth Connection
Use as a Bluetooth Speaker
You can connect your mobile device to this projector via a Bluetooth connection and use it as
a Bluetooth speaker.
Step 1: Press the Power Button once and select Speaker Mode.
Step 2: Go to the Bluetooth setting of your mobile device to turn on Bluetooth, then search
for Vankyo from the search list and pair the mobile device with the projector.
To Next Page
Loading...
