Maintenance
Item
Procedure to be performed
Maintenance schedules are minimum requirements. Ex-
tended use, extreme temperatures, high humidity or other
extreme conditions will require more frequent mainte-
nance.
Appliances
● ●
Check settings and adjustments per manufacturer’s guide.
●
Make sure burner tubes/vents are clean and unobstructed.
● ●
Clean and sanitize.
Awnings
●
Wash with warm water and mild detergent.
● ●
Clean and lube moving parts with WD-40.
Axles & Suspension
●
Check u-bolts, springs and hangers for damage.
● ●
Check torque — all bolts (see axle manufacturing guide for
specs).
Baggage Doors
● ●
Confirm the doors seal tightly and are not leaking.
● ●
Spray lock tumblers with dry graphite.
Brakes & Wheel
Hubs
●
Check amp draw/shoe wear/adjustment (see manufacturing
guide for specs).
● ●
Lube bearings (as needed).
Electrical System
● ● ●
Check and service batteries.
● ● ●
Test all GFI outlets.
● ●
Service generator (if equipped) per manufacturer’s manual.
Entry Door(s)
● ●
Make sure door atches and locks function properly.
● ●
Lube hinges with light oil or WD-40.
● ●
Adjust screen door and atch.
Entry Steps
● ●
Clean and lubricate with lithium spray.
Exterior Fibergass
and Metal
● ●
Wash with warm water and mild detergent.
●
Apply non-abrasive wax except on decals.
Exterior Moldings
● ●
Inspect seaant for voids/gaps/cracks.
Every Trip
Annually
Monthly
Before/After Storage
Every 3 Months
As Required
Every 6 months
REQUIRED MAINTENANCE SCHEDULE
MAINTENANCE