Vanner BRAVO 1050 - Specifications

Page 3 of 12
SPECIFICATIONS
INVERTER Model #
QBC10-12
QBC10-24
Output at 120 VAC-Continuous
1050 Watts
Surge Capacity at 120 VAC (3 secs)
2100 Watts
Input Voltage, VDC
(Deep Cycle Battery Recommended)
12 VDC, Nominal,
10.5 VDC min.,16.0 VDC Max.
24 VDC, Nominal,
21.0 VDC min.,32.0 VDC Max.
Output Voltage
120 VAC ± 5% ...
No Load Current Draw (Battery)
75 ma (Load Demand ON)
55 ma (Load Demand ON)
No Load Current Draw (Battery)
20 ma (Power OFF)
25 ma (Power OFF)
Frequency
_
60Hz ± 0.1%
Output Waveform
Modified Sine Wave
BATTERY CHARGER (if equipped)
Charging Capacity, AMPS
55 or 27.5 AMPS
1 27.5 or 13.7 AMPS
Input voltage, VAC
120 VAC ± 10%
Input Current, IAC
8.0
Bulk Voltage, VDC
14.2 (flooded) 14.1 (Gel)
28.4 (flooded) 28.2 (Gel)
Float Voltage, VDC
13.2 (flooded) 13.6 (Gel)
26.4 (flooded) 27.2 (Gel)
Bypass
Output Current, hardwired (H suffix)
30 amps
Output Current, GFCI (G suffix)
12 amps
Ambient Temperature
-40 to +105°F, -40 to +40°C
Cooling Air
Fan-cooled, 30 cfm
Chassis
Aluminum
Dimensions GFCI
11.57" W x 5.94" H x 11.04" D
Dimensions Hardwire
11.57" W x 5.94" H x 13.04" D
Weight
22 LBS